Welcome toA clothing company
Constant Flow Pumps

Dual-Injection High-Pressure Constant-Flow Infusion Pump

2026-06-09 11:00:53 GN Instruments views

Product Overview

The Dual-Syringe High-Pressure Constant-Flow Infusion Pump is a new generation of precision microflow infusion equipment launched by GN Instruments. It utilizes a dual-syringe series/parallel combination mode, incorporating a high-precision ball screw drive and closed-loop control, effectively addressing the pulsation issues commonly encountered in traditional infusion pumps during continuous delivery. The device incorporates built-in dynamic pressure compensation technology, which performs pre-compression at the moment of syringe switching to ensure smooth output pressure and continuous flow. The parts of the pump body that come into contact with liquids are made of 316L stainless steel/Hastelloy C276 alloy + borosilicate glass, offering excellent chemical resistance and making it suitable for delivering highly corrosive solvents, biological samples, and expensive reagents.

Key Advantages

Truly continuous flow

Alternating operation of dual syringes + intelligent pre-compression enable uninterrupted infusion and long-term operation, avoiding the risk of interruptions associated with traditional single-syringe pumps.

Ultra-micro flow rate precision

The minimum setting step size is 0.0001 mL/min. The syringe displacement is precisely controlled through a 5-stage ball screw and a linear encoder motor, making it suitable for microreactors and mass spectrometry injections.

Overpressure Self-Protection

Built-in pressure upper limit protection program, which automatically shuts down when the pressure exceeds the set value, ensuring the safety of the chromatographic column and reactor.

Intelligent Human-Machine Interaction

The 5-inch industrial touchscreen displays flow rate, pressure, and cumulative volume in real time, and supports gradient programming/scheduled tasks to enable unattended operation.

Operating Principle

The dual-syringe high-pressure constant-flow infusion pump consists of two independent high-precision syringes, a switching valve, a drive mechanism, and a pressure sensor. During operation, syringe A pushes the fluid, while syringe B draws it in. When syringe A is about to finish pushing the fluid, the system performs pre-compression based on the current pressure value – syringe B is activated in advance to compress the fluid. Once the switching valve switches to syringe B, it seamlessly takes over the infusion, ensuring a continuous, pulsation-free fluid supply. The pressure sensor provides real-time feedback to the controller, dynamically adjusting the motor stroke to ensure flow rate accuracy and stability.

Typical System Components

  • Dual syringe pump body (high borosilicate glass + 316L/C276 pump head)

  • High-pressure switching valve module

  • 5.0-inch industrial touchscreen and embedded control board

  • Precision ball screw and linear encoder motor

  • Vent valve and suction filter head assembly

  • Communication interface (RS232/Ethernet reserved, customization supported)

Installation Environment Requirements

The recommended ambient temperature is 20-30°C, with a temperature change of less than 5°C/h and a relative humidity of less than 85% without condensation. Avoid strong vibrations and direct sunlight, and keep away from strong electromagnetic interference. Reserve more than 25 cm of space for heat dissipation at the rear of the device.