Oil filters are widely used in the power industry, the petrochemical industry, oilfield processing, and waste oil purification. They are used to filter, purify, and regenerate industrial oils such as transformer oil. During the oil filtration process, real-time recording of instantaneous flow rates is an important basis for assessing equipment operating conditions, monitoring processing efficiency, and ensuring oil quality.
The customer is a manufacturer of oil filter equipment and previously used Coriolis gear flowmeters, mass flowmeters, and turbine flowmeters for flow monitoring. However, in actual use, there were problems such as unstable accuracy, poor adaptability, and high maintenance costs. In particular, when handling transformer oil under conditions of high viscosity (46 cP), a wide flow rate range (0.3–30 L/min), and high pressure (32 bar), the original solution struggled to meet the requirements.
Based on the operating conditions of the oil filter, the Cixi technical team recommended the use of the CX-M12-AL gear flow meter, which successfully replaced the original flow meter solution and achieved accurate recording of the instantaneous flow rate of transformer oil. Each set of equipment is equipped with one unit, ensuring stability and reliability.
The viscosity of transformer oil is 46 cP. Traditional turbine flowmeters and some mass flowmeters experience reduced accuracy and unstable measurements at higher viscosities.
The flow rate range is 0.3–30 L/min, which is a wide span, requiring the flow meter to maintain an accuracy of 1% at both low and high flow rates.
The pressure resistance requirement is 32 bar. Some flowmeters have insufficient sealing under high pressure, posing a risk of leakage.
The Kraissl gear flow meter, mass flow meter, and turbine flow meter have shortcomings in terms of adaptability, accuracy, and maintenance costs.
Medium: Transformer oil
Viscosity: 46 cP
Flow rate: 0.3-30 L/min
Accuracy: 1%
Temperature: 20-80°C
Pressure resistance: 32 bar
Application Equipment: Oil Filter
Application Scenarios: Power industry, petrochemical industry, oilfield processing, waste oil purification
Core Function:Records instantaneous flow rates and monitors the operating status and processing efficiency of the oil filter.

Oil filters are widely used in the power industry, the petrochemical industry, oilfield processing, and waste oil purification. Their flow monitoring requirements are concentrated in wide flow ranges, high-viscosity media, and high-pressure operating conditions. With its 1% accuracy, 32-bar pressure resistance, and excellent fluid compatibility, the CX-M12-AL gear flow meter has successfully replaced the original Kraissl gear flow meter, mass flow meter, and turbine flow meter, becoming the preferred solution for flow monitoring in oil filtration machines.
Based on the operating conditions and pain points of the oil filter, the Cixi technical team recommended the use of the CX-M12-AL gear flow meter and developed a targeted replacement and upgrade plan.
The CX-M12-AL gear flow meter was selected to replace the original flow meter solution for transformer oil, 46 cP viscosity, 0.3–30 L/min flow rate, and 32 bar pressure resistance.
Maintains 1% accuracy over a wide flow range of 0.3–30 L/min, meeting the monitoring needs of oil purifiers under both low- and high-flow conditions.
With a pressure resistance of 32 bar and reliable sealing, it is suitable for the high-pressure operating conditions of oil filters, eliminating the risk of leaks.
Real-time recording of the instantaneous flow rate of transformer oil, monitoring the operating status of the oil filter, and ensuring the quality of oil treatment.
This solution has been applied in large numbers to customers' oil filter equipment, with each set of equipment equipped with one CX-M12-AL gear flow meter, successfully replacing the original Clara gear flowmeters, mass flowmeters, and turbine flowmeters.
We previously used oval gear flowmeters, mass flowmeters, and turbine flowmeters, which were never quite satisfactory under the high-viscosity, wide-flow conditions of transformer oil. After switching to Cixi's CX-M12-AL, the 1% accuracy is very stable, and the 32-bar pressure resistance is absolutely no problem. Each set of equipment is equipped with one unit, the instantaneous flow rate is recorded very accurately, and maintenance is hassle-free.
Our engineers will contact you within 24 hours with professional product selection advice and technical support