During the production of black-and-white LCD screens, AB adhesive is required for precise mixing and dispensing in specific processes to secure the pins. AB adhesive consists of two components, A adhesive and B adhesive, which must be mixed in a specific ratio before use. This process demands extremely high precision in the mixing ratio and consistency in the dispensed amount.
Previously, the customer's production line did not have automated dispensing equipment and relied entirely on manual mixing and dispensing. Manual adhesive mixing suffers from issues such as inconsistent ratios, imprecise control of adhesive volume, low efficiency, and poor consistency. With rising labor costs at the end-user level, the customer urgently seeks to implement an automation upgrade.
Based on the customer's operating conditions, the Cixi technical team recommended the use of the WF-06P ceramic valveless plunger pump, with 2 units per set, for the precise delivery and proportioning of component A and component B adhesives, respectively. This solution successfully replaced manual adhesive mixing, achieving precise AB adhesive proportioning and quantitative dispensing, reducing the need for manual labor at the end-user level, and improving product consistency.
AB adhesives need to be mixed in proportion, and manual proportioning makes it difficult to ensure a stable ratio, which affects the curing effect of the adhesive and the quality of stitch fixation.
The minimum dispensing amount is 0.04 g/time for A adhesive and 0.02 g/time for B adhesive. The dispensing volume is minimal, requiring the pumping system to have high-precision metering capabilities.
Previously, all adhesive mixing was done manually, resulting in low efficiency and poor consistency. Moreover, the rising labor costs at the end-user level made automation an urgent necessity.
The viscosity of AB adhesive is approximately 50 cP. The two components are delivered separately, and the pump body is required to be compatible with the adhesive, without clogging or curing.
Medium: AB adhesive
Viscosity: Approximately 50 cP
Flow rate: 10-30 ml/min
Minimum dispensing volume: 0.04 g/dispensing for A-component, 0.02 g/dispensing for B-component
Application equipment: Dispensing machine
Application scenario: Black and white LCD screen production line
Core function: Precise glue proportioning, glue-fixed pins
Configuration method:Each set of equipment is equipped with 2 WF-06P units, which deliver component A and component B separately to achieve precise two-component proportioning.

The black-and-white LCD screen manufacturing industry has increasingly stringent requirements for dispensing precision and consistency, and manual dispensing can no longer meet production needs. With its high precision, wear resistance, and valve-free structure that is not prone to clogging, the ceramic valveless plunger pump is an ideal choice for the precise metering of two-component AB adhesives. This solution not only improves dispensing precision but also helps customers save on end-user labor costs.
Based on the operating conditions and pain points of the black-and-white LCD dispensing machine, the Cixi technical team recommended the use of the WF-06P ceramic valveless plunger pump and developed a precision two-component metering solution.
Each set of equipment is equipped with 2 WF-06P ceramic valveless plunger pumps, which deliver component A and component B separately to achieve independent control of the two components.
Through the precise metering of the pump, it is ensured that A-glue and B-glue are mixed accurately in proportion, with a stable ratio and consistent glue curing effect.
The minimum dispensing volume is 0.04 g/cycle for component A and 0.02 g/cycle for component B, meeting the micro-dispensing requirements for pin bonding on black-and-white LCD screens.
Automated dispensing replaces manual mixing, saving labor at the end-user level and improving production efficiency and product consistency.
This solution has been applied in batches on the customer's black-and-white LCD screen production line. Each set of equipment is equipped with 2 WF-06P units, successfully replacing manual adhesive mixing and achieving precise AB adhesive mixing and quantitative dispensing.
In the past, all adhesive mixing was done manually, resulting in inconsistent ratios, poor control over adhesive quantities, and low efficiency. After using Cixi's WF-06P dual-pump solution, the ratio of Component A to Component B adhesive is very precise. Even the smallest amounts of 0.04 g and 0.02 g can be dispensed stably. The pin-fixing effect has improved significantly, and labor has been saved, reducing the number of workers needed on a single production line by several people.
Our engineers will contact you within 24 hours with professional product selection advice and technical support