Q:What are the measurement ranges of different vacuum gauges? How do I match them to a vacuum system?
A:The measurement ranges of different vacuum gauges vary greatly.There is no single vacuum gauge that can cover the entire range from atmospheric pressure to ultra-high vacuum.Therefore, the core principle for matching a vacuum system is"Segment by pressure and use in combination."Capacitance diaphragm gauges are suitable for precision measurements in low vacuum, Pirani gauges are suitable for economical monitoring in rough and low vacuum, cold cathode and hot cathode ionization gauges are suitable for high vacuum and ultra-high vacuum, and compound gauges cover a wide range. When matching, first determine the operating pressure range of the system, then consider the type of gas and accuracy requirements, and finally select a single or combined solution. GN Instruments offers a full range of vacuum gauge products, including Pirani resistance vacuum gauges, compound vacuum gauges, capacitance diaphragm vacuum gauges, and vacuum gauge controllers. We can recommend suitable configurations based on the operating conditions of the vacuum system.
The table below summarizes the types, principles, and measurement ranges of mainstream vacuum gauges for quick reference:
| Vacuum Gauge Type | Measurement Principle | Typical Measurement Range (Pa) | Key Features |
|---|---|---|---|
| Capacitance Diaphragm Gauge (CDG) | Direct measurement: The diaphragm deforms under pressure, and the pressure is measured through changes in capacitance. | 0.1 ~ 1×10⁵ Pa (up to 0.01 Pa) | Regardless of the type of gas, it has high accuracy (up to ±0.5% FS) and is the preferred choice for precision measurements in the low vacuum range. |
| Pirani Vacuum Gauge | Indirect measurement: Uses gas thermal conduction to calculate pressure based on changes in the resistance of the heating filament. | 0.01 ~ 150,000 Pa | Low cost, wide range of applications, readings are greatly affected by the type of gas, and calibration is required according to the gas. |
| cold cathode ionization vacuum gauge | Indirect measurement: Uses cold cathode discharge to generate an ion current, and measures pressure through the discharge current. | 1×10⁻¹ ~ 1×10⁻⁸ Pa | Robust construction, long service life, wide measurement range, relatively low accuracy |
| hot cathode ionization vacuum gauge | Indirect measurement: Uses electrons emitted by a hot cathode to ionize gas, and measures pressure through ion current. | 1×10⁻¹ ~ 1×10⁻¹⁰ Pa | Most commonly used for high vacuum/ultra-high vacuum, high precision, fragile filament, not resistant to contamination |
| Composite vacuum gauge | Combination type: Pirani and ionization gauge (cold/hot cathode) integrated into one unit | 1×10⁵ ~ 1×10⁻⁵ Pa (or wider) | A single gauge covers a wide range, providing continuous measurement from rough vacuum to high vacuum, simplifying system configuration. |
Unit Conversion Reference:
1 mbar ≈ 100 Pa, 1 Torr ≈ 133 Pa. The specific model ranges may vary among different manufacturers. The table above provides general reference ranges.
The core logic of matching is:First, determine the system's operating pressure range, then consider the gas type and accuracy requirements, and finally choose a single or combined solution.。
Based on the process vacuum level, select directly from the table below:
| Vacuum range | Pressure Range (Pa) | Recommended Vacuum Gauge Types | Typical Application Scenarios |
|---|---|---|---|
| Rough vacuum | 1×10⁵ ~ 1×10² | Capacitance diaphragm vacuum gauge, Pirani vacuum gauge | Vacuum drying, vacuum packaging, roughing line monitoring |
| Medium vacuum | 1×10² ~ 1×10⁻¹ | Capacitance diaphragm vacuum gauge, Pirani vacuum gauge | Vacuum deposition (low vacuum section), vacuum degassing, lighting |
| High vacuum | 1×10⁻¹ ~ 1×10⁻⁵ | cold cathode/hot cathode ionization gauges, compound vacuum gauges | Semiconductor etching, PVD/CVD, vacuum deposition |
| Ultra-high vacuum | < 1×10⁻⁵ | hot cathode ionization gauge (B-A gauge), cold cathode ionization gauge | Surface analysis, ALD, particle accelerators |
For example, if the process is set at5~6 mTorr (approximately 0.67~0.8 Pa)When high-precision control is required, a capacitance diaphragm gauge is the ideal choice, with an accuracy of up to 0.5% of the full scale.
| Considerations | Description |
|---|---|
| Accuracy and Stability | Capacitance diaphragm gauges have the highest accuracy (up to ±0.5% FS), while ionization gauges can have errors of up to ±70% under high vacuum conditions. Selection should be based on control requirements. |
| Environmental adaptability | In environments with dust or oil vapor, the Pirani gauge port should be installed facing downward to prevent the deposition of contaminants. In corrosive gas environments, a corrosion-resistant type (such as a special diaphragm material or a corrosion-resistant filament) should be selected. |
| Calibration and Maintenance | It is recommended to calibrate at least once a year, and to calibrate immediately when replacing parts or if readings are abnormal. |
Summary: The essence of matching vacuum gauges is to "let the right tool work in the right pressure range."
Remember this decision-making chain:Determine the pressure range → Confirm the gas type → Select a single or combined solution → Verify accuracy and environmental requirements。
For different vacuum measurement needs,GN Instruments Instrument Co., Ltd.The following product solutions are available:
| Product Series | Type | Measurement Range | Applicable Scenarios |
|---|---|---|---|
| CFG-500 Capacitance Diaphragm Gauge | Capacitance diaphragm type | 1~10⁵ Pa | Precision measurement of medium and low vacuum, changes in gas types, or corrosive gas environments |
| CX-PRN Pirani Vacuum Gauge | Pirani type | 10⁻¹~10⁵ Pa | Routine monitoring of rough and low vacuum, with fixed or adjustable gas types |
| CX-PRN14 cold cathode Compound Vacuum Gauge | Combination type (Pirani + cold cathode) | 10⁻⁵~10⁵ Pa | Wide-range continuous monitoring, PVD/CVD, etching and other semiconductor processes |
| CX-PRN15 hot cathode Compound Vacuum Gauge | Composite (Pirani + hot cathode) | 10⁻⁵~10⁵ Pa | High vacuum/ultra-high vacuum measurement, ALD, high vacuum deposition |
Our engineers will recommend a suitable vacuum gauge type and configuration based on your vacuum system's operating pressure range, gas types, accuracy requirements, and interface conditions. For precision measurements in low vacuum, capacitance diaphragm vacuum gauges are recommended; for continuous monitoring over a wide range, compound vacuum gauges are recommended; for varying gas types or corrosive gases, capacitance diaphragm vacuum gauges are preferred. If necessary, we can provide prototype testing services to verify the measurement performance under actual operating conditions.