Q:What are the differences between low-speed gear pumps, helical gear pumps, and magnetic gear pumps? How should I choose when selecting a model?
A:Low-speed gear pumps, helical gear pumps, and magnetic gear pumps are all important members of the positive displacement gear pump family, but theirdesign orientations and application scenarios are markedly different.Low-speed gear pumps are characterized bylow rotational speed, high viscosity, and precision meteringas its core, making it suitable for the precise conveyance and proportioning of high-viscosity media; the helical gear pump focuses onHelical tooth profile, low pulsation, low noiseas its features, suitable for processes with high requirements for flow stability; magnetic gear pumps haveMagnetic coupling, seal-less, leak-proofas its core advantages, making it suitable for the conveyance of toxic and hazardous, flammable and explosive, high-purity, or precious media. When selecting a model, a comprehensive assessment should be made based onthe fluid viscosity, corrosiveness, leakage tolerance, pulsation sensitivity, operating pressure, and temperaturefor a comprehensive assessment. GN Instruments also offers a full range of low-speed gear pumps, helical gear pumps, and magnetic gear pumps. Our engineers can recommend the most suitable pump model based on the actual operating conditions.
| Comparison Dimensions | Low-speed gear pump | Helical gear pump | Magnetic Gear Pump |
|---|---|---|---|
| Core Design Orientation | Low speed, high viscosity, precision metering | Helical tooth profile, low pulsation, low noise | Magnetic coupling, seal-less, leak-proof |
| Sealing method | Mechanical seal or gland packing seal | Multiple sealing methods available | Static seal (magnetic coupling), leak-proof |
| Applicable viscosity | 100 ~ 500,000 cP (high viscosity) | < 1000 cps (mainly medium to low viscosity) | 0.2 ~ 1500 cps (mainly low viscosity) |
| Speed range | 10 ~ 100 RPM | < 1500 RPM | 100 ~ 4000 RPM |
| Pulsation level | Moderate, low pulsation frequency at low speeds | Low, smooth engagement of helical teeth | Moderate, comparable to ordinary gear pumps |
| Metering accuracy | ±0.3%, repeatability ±0.2% | High; flow rate deviation can be controlled within ±2% | High, metering error can be less than 1% |
| Operating pressure | Up to 25 MPa; the high-temperature type can reach 250°C | 0 ~ 100 bar | Up to approximately 25 bar; the system can withstand a pressure of 25 bar |
| Typical cost | Moderate | Moderately high | Higher |
Depending on the actual operating conditions, the pump type can be selected according to the following logic:
| Operating Conditions | Recommended Pump Model | Reason |
|---|---|---|
| High-viscosity media (>1000 cP), such as resins, adhesives, and greases | Low-speed gear pump | Designed specifically for high viscosity; the higher the viscosity, the more accurate the metering; low rotational speed reduces shear |
| Sensitive to flow pulsation, such as precision coating, metering and mixing | Helical gear pump | The helical teeth mesh smoothly, with extremely low flow pulsation and smooth output. |
| Toxic and hazardous, flammable and explosive, high-purity or precious media | Magnetic Gear Pump | Magnetic coupling without shaft seal, leak-proof, ensuring safety and purity |
| Highly corrosive media (strong acids, strong bases) | Magnetic Gear Pump (Fluoroplastic Type) | Available in fluoroplastic or Hastelloy materials, corrosion-resistant and leak-proof |
| Medium to low viscosity, clean media, low noise required | Helical Gear Pump | Helical gear pumps produce less noise than spur gear pumps and are suitable for clean operating conditions. |
| High viscosity + leak-proof requirement | Magnetic gear pump (maximum viscosity limit needs to be confirmed) or low-speed gear pump + magnetic seal | Magnetic pumps have limited viscosity resistance. For high viscosity, it is recommended to choose a low-speed gear pump with a magnetic seal version. |
| Limited budget, single medium, and minor leakage allowed | Low-speed gear pump (standard type) | Lower cost, meets general industrial metering needs |
| Media containing solid particles or fibers | Neither is recommended | Gear pumps are sensitive to particles. It is recommended to switch to a screw pump or a diaphragm pump. |
The following information must be confirmed before selection:
Medium name and viscosity:The viscosity value at the operating temperature (cP or cSt) determines the choice of pump type.
Medium properties:Whether it is corrosive, toxic and hazardous, flammable and explosive, and whether it contains solid particles.
Flow Rate Range:Normal flow rate, minimum flow rate, maximum flow rate, and metering accuracy requirements.
Operating pressure and temperature:System pressure, temperature range, and whether the operating conditions are high temperature or high pressure.
Pulsation sensitivity:Whether the process is sensitive to flow pulsation and whether low-pulsation conveyance is required.
Leakage requirements:Whether minor leakage is allowed and whether leak prevention is required.
Installation conditions:Spatial dimensions, connection method, drive method (motor type).
To meet the requirements of different operating conditions,GN Instruments Instrument Co., Ltd.The following product solutions are available:
| Product Series | Pump Type | Core Parameters | Applicable Scenarios |
|---|---|---|---|
| Low-displacement gear metering pump | Low-speed gear pump | Displacement 0.05–2.4 cc, viscosity 100–500,000 cP, temperature resistance 330°C | Micro-dispensing of high-viscosity media such as glue, polyurethane, and hot melt adhesive |
| Medium/Large Displacement Gear Metering Pump | Low-speed gear pump | Displacement 3.2–350 cc, maximum working pressure 25 MPa, temperature resistance 330°C | Medium-flow, high-viscosity medium transfer, metering, and proportioning |
| CX-HD Helical Gear Metering Pump | Helical Gear Pump | Maximum viscosity 100,000 cps, vacuum -0.98 bar, pressure <100 bar | High-viscosity fluids and high-vacuum conditions, precision coating |
| CX-HW Helical Gear Metering Pump | Helical gear pump (magnetic seal) | Magnetic seal for leak prevention, pressure <30 bar, speed <1000 rpm | Low-pulsation conveyance of highly toxic, flammable, and highly corrosive media |
| Low-Flow Magnetic Gear Pump | Magnetic Gear Pump | Displacement 0.07~0.6 ml/r, viscosity 0.2~1500 cps, pressure 0.8 MPa | Laboratories, pharmaceutical liquid preparation, micro-filling, high-purity media |
| Fluoroplastic Magnetic Gear Pump | Magnetic Gear Pump | Fluoroplastic material, resistant to strong acids and strong alkalis, leak-proof | Leak-proof conveyance of highly corrosive, toxic, and hazardous media |
Our engineers will recommend a suitable pump model and configuration based on your fluid's viscosity, corrosiveness, leakage requirements, pulsation sensitivity, and flow rate range. For high-viscosity precision metering applications, low-speed gear pumps are recommended; for applications with low pulsation requirements, helical gear pumps are recommended; for toxic, hazardous, or high-purity media, magnetic gear pumps are recommended. If necessary, we can provide prototype testing services to verify the conveying and metering performance under real operating conditions.