Q:How should a flow meter be selected for measuring the flow of special corrosive media (such as hydrochloric acid and hydrofluoric acid)? How do the material and the measurement principle match?
A:Hydrochloric acid and hydrofluoric acid are among the most challenging corrosive media in industries such as chemicals, pharmaceuticals, and semiconductors. The core threat they pose to flowmeters lies incorroding wetted materials, damaging sealing structures, and even corroding measuring elements.The core logic of selection is:First, eliminate unsuitable principles based on the characteristics of the medium, and then specifically select corrosion-resistant electrode and lining materials.Hydrochloric acid is a non-oxidizing acid, while hydrofluoric acid is even more unique, as it can corrode glass and silicon-containing materials, and can even corrode tantalum, the "king of corrosion resistance." Therefore,For hydrochloric acid, the preferred options are an electromagnetic flow meter (Hastelloy B electrode + PTFE lining) or an all-PTFE gear flow meter. For hydrofluoric acid, glass and tantalum must be avoided, and the preferred options are an electromagnetic flow meter (tantalum electrode + PTFE lining) or an all-PTFE/PVDF variable area flow meter.GN Instruments offers a variety of solutions, including all-PTFE gear flowmeters, corrosion-resistant electromagnetic flowmeters, and plastic tube variable area flowmeters, which can be selected based on the concentration, temperature, and pressure of the medium.
Although both are strong acids, hydrochloric acid and hydrofluoric acid have completely different corrosion mechanisms on materials, and they must be treated differently when selecting a flow meter.
| Medium | Chemical Properties | Threat to flowmeters | Core principles for selection |
|---|---|---|---|
| Hydrochloric acid (HCl) | Non-oxidizing acid, reducing environment, highly corrosive to most metals | Corrodes metals such as stainless steel and titanium; corrodes glass electrodes | Avoid Hastelloy C and titanium, which are suitable for oxidizing environments; Hastelloy B or tantalum electrodes are preferred. |
| Hydrofluoric acid (HF) | Weak acid but extremely corrosive, capable of corroding glass and silicon-containing materials, and exhibits special corrosive behavior towards metals. | Dissolves glass and ceramics; causes tantalum electrodes to become brittle and crack; corrodes stainless steel | Glass tubes and tantalum electrodes must be avoided; PTFE, PFA, PVDF, and other fluoroplastic materials are preferred. |
Based on the properties of the media and the operating conditions, the following are the recommended solutions for hydrochloric acid and hydrofluoric acid.
Magnetic flowmeters are suitable for conductive acidic liquids with a conductivity of ≥5 μS/cm, and the vast majority of industrial acidic water-based solutions meet this criterion. Its corrosion resistance depends entirely onElectrodesandLiningbeing correctly paired.
| Medium | Recommended electrode material | Recommended lining material | Key points to avoid pitfalls |
|---|---|---|---|
| Hydrochloric acid (HCl) | Hastelloy B (Hb) or tantalum (Ta) | PTFE (Polytetrafluoroethylene) or PFA | Hastelloy C and titanium electrodes are absolutely prohibited, as they are not resistant to reducing acids such as hydrochloric acid. Tantalum electrodes are suitable for hydrochloric acid with a concentration of <40% and are not suitable for hydrofluoric acid. |
| Hydrofluoric acid (HF) | Platinum-iridium alloy (Pt-Ir) or specially customized electrodes | PTFE or PFA | The use of glass, ceramic, and tantalum electrodes is strictly prohibited. Hastelloy B may also be corroded in hydrofluoric acid, and the concentration and temperature need to be confirmed. Platinum-iridium alloy has a broad spectrum of corrosion resistance, but it is the most expensive. |
Key points for selecting lining materials:PTFE has excellent chemical stability and can withstand boiling hydrochloric acid, sulfuric acid, and aqua regia, making it the preferred lining material for highly corrosive media. PFA has similar properties to PTFE, but is more suitable for high-pressure conditions. Under negative pressure conditions, it is not advisable to use soft material linings such as PTFE.
Positive displacement gear flowmeters are the ideal choice for low-flow, high-viscosity corrosive liquids. Its core advantages lie inThe housing, gears, bearings, and seals are all made of PTFE (polytetrafluoroethylene) material,achieving an all-plastic structure that can simultaneously withstand various highly corrosive fluids such as hydrochloric acid, hydrofluoric acid, and nitric acid.
For low-flow process monitoring, plastic tube variable area flowmeters are an economical and practical choice. Selection requirements:The tapered tube material is PTFE or PVDF, the float material is ceramic or PTFE-coated stainless steel, and the seal material is FKM or PTFE.。
| Material Options | Applicable media | Key Notes |
|---|---|---|
| PVDF Housing | Hydrofluoric acid, hydrobromic acid, nitric acid (up to 75%), sulfuric acid (up to 98%), hydrogen peroxide, etc. | PVDF has good resistance to hydrofluoric acid and is the preferred material for hydrofluoric acid applications. |
| Polypropylene housing | Hydrochloric acid, sulfuric acid (up to 60%), phosphoric acid, acetic acid, etc. | Polypropylene is suitable for non-oxidizing acids such as hydrochloric acid, but has poor resistance to hydrofluoric acid and concentrated nitric acid. |
The following information must be confirmed before selection:
Medium name and concentration:Hydrochloric acid or hydrofluoric acid, and what is the percentage concentration? Different concentrations have a significant impact on the corrosion resistance of materials.
Operating temperature:An increase in temperature significantly accelerates the corrosion rate and also affects the suitability of lining and plastic materials.
Operating pressure:Whether negative pressure conditions are present. Soft linings such as PTFE may deform under negative pressure and require special verification.
Presence of solid particles:For acidic liquids containing particles, the impact of wear on gears and floats needs to be assessed.
Flow rate range:Minimum flow rate, normal flow rate, and maximum flow rate, ensuring that the operating point falls within 20%~80% of the measurement range.
Conductivity:Electromagnetic flowmeters require a conductivity of ≥5 μS/cm, which must be confirmed in advance.
Accuracy requirements:Whether for trade settlement, precision proportioning, or process monitoring, the application determines the selection criteria and budget.
For special corrosive media such as hydrochloric acid and hydrofluoric acid,GN Instruments Instrument Co., Ltd.The following product solutions are available:
| Product Series | Measurement Principle | Corrosion-resistant solutions | Applicable Media | Applicable Scenarios |
|---|---|---|---|---|
| All-PTFE Gear flow meter | Positive displacement (gear) | Housing/gear/bearing/seal all made of PTFE material | Hydrochloric acid, hydrofluoric acid, sulfuric acid, nitric acid | Precision metering of low-flow strong acids, fine chemicals, pharmaceuticals |
| Corrosion-resistant electromagnetic flow meter | Electromagnetic induction | Hastelloy B/Tantalum/Platinum-Iridium Electrode + PTFE/PFA Lining | Conductive acid solution (conductivity ≥ 5 μS/cm) | Process Control and Trade Settlement for Medium to High Flow Rates of Acidic Liquids |
| Plastic Tube Variable Area flow meter | Variable area type | PTFE/PVDF tapered tube + ceramic/PTFE float | Highly corrosive liquids such as hydrochloric acid and hydrofluoric acid | Low-flow process monitoring, acid addition flow control for acid pickling tanks |
| Coriolis mass flow meter | Coriolis force (mass flow) | Tantalum or Hastelloy wetted material | High-concentration/viscosity acids, non-conductive acids | High-precision metering, semiconductor wet cleaning solution dispensing |
Based on your fluid name, concentration, temperature, pressure, flow rate range, and accuracy requirements, our engineers will recommend suitable measurement principles and corrosion-resistant material solutions. For low-flow strong acid metering, a full PTFE gear flow meter is recommended; for medium- to high-flow conductive acid solutions, a corrosion-resistant electromagnetic flow meter is recommended; for low-flow process monitoring, a plastic tube variable area flow meter is recommended. If necessary, we can provide prototype testing services to verify corrosion resistance and metering accuracy under actual operating conditions.